portable sequencer
user guide
ガイド
V.1.0.9
printable guide
v.1.0.9
.pdf
click to download
warnings and important notes before connecting this unit to other devices, turn off the power to all units. this will help prevent malfunctions and/or damage to speakers or other devices. if you need to connect/disconnect wires during use, always make sure to connect the cable to the OP–XY first. never connect the 3.5 mm plugs going from the OP–XY's inputs or outputs to a microphone input with active phantom power. this could damage the OP–XY. be sure to charge the unit using only 5V usb power, such as that from the usb ports of a computer, or by using a dedicated usb charger. make sure to read the regulatory statements here
to keep the battery healthy, the unit should be charged at least every 6 months. if not used for a long time, it may not charge again. ambient working temperature:10°–35°C (50°–95°F) ambient storage temperature:0°–35°C (32°–86°F) clean the shell of the unit with a lightly damp cloth. let dry before usage.
caution do not try to charge or use a unit with a seemingly damaged battery. only a battery supplied by teenage engineering installed by qualified personnel should be used. disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. to prevent possible hearing damage, do not listen at high sound levels for long periods. store small parts out of the reach of children and infants. if accidentally swallowed, contact an emergency medicine doctor immediately.
warranty and return policy the OP–XY is fully factory tested and comes with a 12 month (from purchase date) warranty. this does not include malfunction due to misuse of the device, such as being dropped, crushed or used in an application of inappropriate voltages to the device's connectors or improperly designed or executed modifications. in particular, you are the sole responsible for damage caused by a charging method other than 5V usb power. the warranty does not cover shipping charges. make sure to read the terms and conditions here .
1 1.1 1.2 1.3 1.4 1.5 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 3 4 4.1 4.2 4.3 4.4 5 5.1 5.2 6 6.1 6.2 7 7.1 7.2 7.3 7.4 8. 8.1 8.2 8.3 8.4 9. 9.1 9.2 9.3 10. 10.1 10.2 10.3 11. 11.1 11.2 12. 12.1 12.2 12.3 14. 14.1 14.2 14.3 14.4 14.5 14.6
hardware overview power on and charging speaker, volume and pitchbend inputs and outputs, internal mic and level meter technical specifications electrical characteristics layout main modes modules tracks sequencer transport controls keyboard sample projects tempo com players bar volume encoders guide conventions get started making your first project on OP–XY sequencing a drum beat recording a bassline adding chords adding punch-in FX™ main modes and modules main modes modules track buttons using the track buttons linking tracks sequencer step sequencing live recording step recording extending your sequence with bar step components what are step components? adding step components to a sequence what step components are there? step component reference table players arpeggio maestro hold project rename, save, create and configure projects folder project settings tempo edit tempo what are grooves? workflow patterns, scenes, songs and projects creating a song the importance of saving instrument engine envelopes filter lfo preset settings view and create presets
15. 15.1 15.2 15.3 15.4 15.5 15.6 15.7 16. 16.1 16.2 16.3 17. 17.1 17.2 17.3 17.4 17.5 18. 18.1 18.2 18.3 18.4 19. 19.1 19.2 19.3 19.4 19.5 20. 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8 20.9 21. 21.1 21.2 21.3 21.4 21.5 21.6 22. 22.1 22.2 22.3 22.4 22.5 22.6 22.7 22.8 22.9 22.10 22.11 23 24. 24.1 24.2 24.3 24.4 24.5 25.
auxiliary brain™ punch-in FX™ external midi external cv external audio tape FX I and FX II arrange switching tracks and patterns edit controls scenes and song mode mix levels pans and sends eq saturator master signal flow diagram sample one shot synth sampler drum sampler multisampler sample folder com setting the multi-out port and bluetooth midi system settings midi controller mode devices mtp synth engines axis dissolve epiano external hardsync organ prism simple wavetable fx chorus delay distortion lofi phaser reverb how to enable velocity control a synth with midi control an analog synth with cv and gate sync a vintage drum machine sync a pocket operator send audio to and from an external effect control OP–XY with a midi keyboard use an audio interface with OP–XY use the pitchbend as a modulation source backup projects load samples from a computer into the sample folder on OP–XY midi cc reference table te boot firmware update factory reset function test reset volume potentiometer calibration exiting te boot credits
check that the following items are included when you open the box
OP–XY unit
quick start guide
dual velcro back fasteners
usb-c cable
back to index
teenage engineering OP–XY model no: TE033AS001 fcc regulatory compliance this device complies with part 15 of the fcc rules. operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ised regulatory compliance this device contains licence-exempt transmitters that comply with innovation, science and economic development canada's licence-exempt rss(s). operation is subject to the following two conditions (1) this device may not cause interference. (2) this device must accept any interference, including interference that may cause undesired operation of the device. this equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. end user must follow the specific operating instructions for satisfying rf exposure compliance. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. the portable device is designed to meet the requirements for exposure to radio waves established by ISED. these requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. the highest SAR value reported during product certification for use when properly worn on the body, with 0 mm separation, was 1.11 W/kg. IC: 9915A-033A
conformité réglementaire d'ised l'émetteur exempt de licence contenudans le présent appareil est conforme aux cnr d'innovation, sciences et développement économique canada applicables aux appareils radio exempts de licence. l'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire debrouillage; (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. l'utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur. l'appareil portable est conçu pour répondre aux exigences d'exposition aux ondes radio établies par l'ISED ces exigences établissent un SAR limite de 1.6 W/kg en moyenne pour un gramme de tissu organique. la valeur SAR la plus élevée signalée lors de la certification de produit à utiliser lorsqu'il est correctement porté sur le corps, avec une séparation de 0 mm, est 1.11 W/kg. IC: 9915A-033A
eu compliance hereby, teenage engineering declares that the radio equipment type OP–XY, TE033AS001, is in compliance with directive 2014/53/EU. the full text of the EU declaration of conformity is available at the following internet address: here frequency band: 2400 - 2483.5 MHz maximum output power: 10 dBm EIRP korea sar information: grade: 2 등급 head SAR: 0.906 W/kg recycling electrical and electronic equipment, parts and batteries marked with this crossed-out wheelie bin symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment. this product contains a built in Li-I-on battery.
this product contains intellectual property right material (the “material") owned by teenage engineering.
protected materialthe material within this product includes, but is not limited to, samples, sound files, style data, accompaniment patterns, phrase data, audio loops, and image data.permitted usageyou are permitted to use the material in the creation, performance, recording, and distribution of your own original creation.prohibited usageyou are prohibited from redistributing, reselling, leasing, sharing, reproducing, or publicly displaying the material in its original or modified form, including through online platforms, public performances, broadcasts, or as part of derivative works, unless it is substantially transformed into an original creation.
respect for third-party copyrights you are responsible for ensuring that your use of the product does not infringe on any third-party copyrights. teenage engineering assumes no liability for any copyright infringements that result from the use of this product.protected trademarksteenage engineering holds all rights to its registered trademarks.
