24. te boot

back to index

te boot is where firmware updates, function tests and factory resets take place.

accessing te boot

first power your OP–XY off.

while powering on, hold com.

you will now be placed into te boot. the screen will show three options:
1. upload firmware
7. factory reset
8. system menu

24.1 firmware update

back to index

1. access te-boot
2. press track button 1
3. connect OP–XY to your computer with a usb cable. the OP-XY will appear as a removable disk on your computer

4. copy the firmware file to the removable disk.5. eject the removable disk.
the update will now start.6. wait for the update to finish and follow the on-screen instructions.

24.2 factory reset

back to index

1. access te-boot.
2. press track button 7.
3. follow the on-screen instructions.
   

note: all user content will be removed. if you wish to backup your data, you can do so by following the "how to backup your projects" chapter.

factory reset allows you to erase all user settings and content, as well as recreate the original file structure and restore the unit to factory default.

24.3 function test

back to index

1. access te-boot.
2. press track button 8.
3. follow the on-screen instructions.
   

note: if you press any buttons and they still show up red then please contact our customer support.

24.3 reset volume potentiometer calibration

back to index

1. access te-boot.
2. press track button 8.
3. follow the on-screen instructions.
   

press the M2 or track 2 button to select "reset volume pot calibration". when done you will be taken back to te boot.

24.5 exiting te boot

back to index

if you wish to exit te boot, simply power your device off and then on again.

previous chapter

back to index

next chapter