return to index
sometimes you will need to press buttons in sequence, sometimes in combination. these illustrations and texts will help you to follow along in the guide.
to press a button, tap it and then release. to hold a button, press it and keep it pressed down. many of the knobs and buttons have different functionality depending on the
a single button in a cell is for a SINGLE press.
multiple buttons in a cell divided by a plus is for a combination press.
multiple buttons in a cell divided by an arrow is for a sequence press.
the hold icon above a single button means you’re supposed to long hold.
multiple buttons divided by a plus is for a combination hold.
HOLD THE FIRST BUTTON, THEN RELEASE AND HOLD THE SECOND BUTTON.
the tap icon above a single button means you’re supposed to press the button and release it.
tap and hold
multiple buttons divided by a plus is for a combination tap and hold.
tap, then hold
multiple buttons in a cell divided by an arrow is for a sequence hold.
the pads will show when any pad can be pressed or a value typed using them.
when the pad leds are blinking, it’s displayed with small red dots above the pads.
when pads should be pressed to start an action on the device a hand will show to describe this.
X / Y PARAMETER
when a knob is shown in a cell this describes TURNing the KNOB.
the fader icon will show either one of the three settings: upwards for maximum / downwards For minimum / middle for the mid setting.
TIME CODE VIEW
when the time code view is shown in a cell the function of that view is described below.
icons that are lit up on the display in some scenarios will show in the bar running across the top.
the group keys showN without their respective icons when they are used to access groups.
GROUP KEY FUNCTIONS
the group keys showN with their respective icons beneath them when the group keys are used for a combination hold or press.