CM–15
condenser microphone
user guide
ガイド
v.1.0.6

notice. read this first.
warnings and important notes
before connecting this unit to other devices, turn off the power to all units. this will help prevent malfunctions and/or damage to speakers or other devices. if you need to connect/disconnect wires during use, always make sure to connect the cable to the CM–15 first.
never plug a 3.5 mm jack connected to active phantom power into CM–15. this could damage the CM–15.
be sure to charge the unit using only 5V usb power, such as that from the usb ports of a computer, or by using a dedicated usb charger.
make sure to read the regulatory statements here


make sure you always have the CM–15 placed so it is level and sure to remain stable.
use your CM–15 where the ambient temperature is between 0 °C and 50 °C (32 °F and 122 °F) and the relative humidity is lower than 95 %. never install or use the unit in any of the following locations:
  • humid environments or baths and washrooms.
  • safety-critical applications.
  • nuclear facilities and weapons systems.
  • aerospace applications or environments for automotive installations

caution
risk of explosion or fire if the battery is replaced with incorrect type or the unit is perforated.
do not try to charge or use a unit with a seemingly damaged battery.
only a battery supplied by teenage engineering and installed by qualified personnel should be used.
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. 
leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
to prevent possible hearing damage, do not listen at high sound levels for long periods.
store small parts out of the reach of children and infants. if accidentally swallowed, contact an emergency medicine doctor immediately.
warranty and return policy
the CM–15 is fully factory tested and comes with a 12 month (from purchase date) warranty. this does not include malfunction due to misuse of the device, such as being dropped, crushed or used in an application of inappropriate voltages to the device's connectors or improperly designed or executed modifications. 
in particular, you are the sole responsible for damage caused by a charging method other than 5V usb power.
the warranty does not cover shipping charges. make sure to read the terms and conditions here.
what's in the box

Check that the following items are included when you open the box
CM–15 unit
user guide
mini xlr to xlr cable 
usb-c cable
plastic cover
field pouch
standard 1/4" and 3/8" adapter
regulatory statements
teenage engineering CM–15model no: TE029AS001 





fcc regulatory compliance
this device complies with part 15 of the fcc rules. operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • reorient or relocate the receiving antenna.
  • increase the separation between the equipment and receiver.
  • connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • consult the dealer or an experienced radio/TV technician for help.
RECYCLING

electrical and electronic equipment, parts and batteries marked with this crossed-out wheelie bin symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment. this product contains a built in Li Ion battery.