TX–6 OS updates
update directly from your web browser with our midi updater
or go through these steps:
1. connect TX–6 via usb to a computer.2. hold the cue button while switching power on to enter firmware update mode.3. the device will show up as a mass storage disk.
4. put the new firmware file on the disk and eject.5. wait for the update to finish.
watch video
pro-tip:
save your settings to a scene before updating. this way you can easily revert back to your own custom configuration.
OS
date
new update features:
1.3.3
2026.01.28
click to download
- usb audio stability
1.3.1
2025.12.23
click to download
- support TE usb audio driver for windows
1.3.0
2025.06.10
click to download
- extended gain range
- user configurable sequencer patterns with pitch per step
- pattern chaining
- portamento setting
- midi synth generator
- midi cc knob function
- save additional scenes to usb memory
- improve mass storage disk performance and flexibility
- playback of float format wav files from usb disk
- beat detect on usb inputs
- link mode
- fix usb audio on linux
- support usb audio float format when pcm not available
1.2.15
2025.03.28
click to download
- usb stability and bug fixes
- handle recording to slow usb memories
- fixed bug with integer rollover on disk record
- input mode accessible from system menu
- split mode has custom balance graphics
- added combined synth play+seq mode
- start/stop/tempo controllable via midi cc
1.2.13
2024.08.12
click to download
- bug fixes and improvements
1.2.12
2024.04.11
click to download
- sampler
- looper
- detune parameter for oscillators
- start/stop signal when using sync16 output
- usb audio stability and compatibility
- dual mono aux send option
1.2.10
2023.06.14
click to download
- 12 in / 12 out configuration available to use all 12 channels as inputs and outputs simultaneously (compatible only with mac OS and iOS).
- integration with TP–7 recorder and new usb audio mode
- usb audio host mode support and integration with CM–15 microphone
- control master volume with ortho remote
- compensate clock for more accurate sample rate
1.2.5
2022.10.11
click to download
- added beat tracking of audio input signals.
- improved tap tempo control.
- added one decimal for finer bpm adjustment.
- added tempo sync to pong tape fx.
- improved DC blocking filter on inputs.
- added midi cc control of track gain setting.
- added midi cc control of sequencer pattern.
- use range 0-127 for all midi cc.
- made quick access selection persistent.
- fixed issue when device was started with usb disk inserted.
- prevent file corruption when powering off during recording.
1.1.4
2022.06.30
click to download
- usb mass storage disk record/playback for 24-bit 48 kHz stereo wav files, including armed recording with automatic start on audio detect.
- PO-sync output on aux and cue, with selectable 8th note for PO-sync and 16th note for modular systems.
- external midi control of all TX–6 parameters, for complete remote control over midi.
- extended midi support for synth mode to play the synth chromatically using midi notes from an external keyboard.
- added 'scenes' to save and load all settings.
- usb audio multiple sample rate support: 48 kHz and additionally 44.1 kHz, for compatibility with MPC live etc.
- BLE midi clock in/out support with clock routing settings.
- BLE host mode to connect peripherals like BLE midi keyboards.
- switchable aux and cue outputs, to be able to utilize the higher output level of the aux jack if needed for high impedance headphones.
- added balanced mono input mode in addition to the stereo / mono / split modes.
- parameters keep their values until a knob is moved, making it easier to switch knob config without undesired behavior.
- no snap back of the freeze FX parameter. click to reset instead.
- smoother change of FX I send.
- stability bugfix for usb midi host mode.
- usb audio mode set on menu exit, instead of directly.