return to menu
the OP-Z has a separate track dedicated entirely to controlling your light rig. you can program this track just like any other track on the OP-Z.
set pattern use the value keys to select one of the 10 patterns.
effects play the white keys to trigger effects and animations.
preview mode toggle between fixture preview and step view
main color the main color applied to all connected rgb fixtures
alternate color used by certain effects to instantly switch color
pattern speed the scroll speed of the currently selected pattern
intensity the default intensity of the currently lit fixtures
to control dmx you need a usb dmx interface connected to the OP-Z. It can be connected directly to the usb port. connecting the dmx interface directly to you OP-Z is convenient but might deplete you battery faster than you want. in that case, use a powered hub.
dmx.json
OP-Z can transform sequencer data to dmx channel data and send it out using a usb dmx interface. use the dmx.json file found in content mode to configure the outgoing channel data to correspond to your dmx fixture setup.
the maximum total number of channels that can be configured is 128. the supported channel types are:
channel range description
red
0 – 255
red color
green
green color
blue
blue color
white
white color
color
color wheel
intensity
intensity / dimmer
fog
0, 255
triggered by animation 14
knob1
green dial (page 1)
knob2
blue dial (page 1)
knob3
yellow dial (page 1)
knob4
red dial (page 1)
knob5
green dial (page 2)
knob6
blue dial (page 2)
knob7
yellow dial (page 2)
knob8
red dial (page 2)
custom fixed value
on
255
always on
off
0
always off
previous chapter
next chapter
