return to index
SYSTEMa lets you configure stuff like paed-velocity or how your midi and sync ports behave. for quick access, you can learn the numbers, like typing 301 and ENTER to turn velocity on. now you’re in expert mode!
to customize the behavior of your Medieval press (altero) and (erado) to access system settings.
press (minus) or (plus) to navigate through the settings, and then ENTER to select.
to navigate back to the previous page you can press (altero) and intra.
to customize the behavior of your Medieval press (SHIFT) and (ERASE) to access system settings.
to navigate back to the previous page you can press (SHIFT) and ENTER.
alternatively you can also use the following codes to directly access the setting once in system settings.
code
path
setting
100
mid
clk
off
MIDI Clock Off (default)
101
in
MIDI Clock in (receive only)
102
out
MIDI Clock Out (send only)
200
syn
8
Sync In Rate 1/8th Note
201
16
Sync In Rate 1/16th Note (default)
202
24
SYNC IN RATE 24 PULSES PER QUARTER NOTE
210
SYNC OUT RATE 1/8TH NOTE
211
Sync Out Rate 1/16th Note (default)
212
Sync Out Rate 24 Pulses per Quarter Note
300
pad
vel
PAD VELOCITY OFF (DEFAULT)
301
hi
PAD VELOCITY HIGH. PLAY WITH A SOFT TOUCH
302
lo
PAD VELOCITY LOW. FOR VIGOROUS PLAY STYLES
310
sca
12t
12 TONE EQUAL TEMPERAMENT (DEFAULT)
311
maj
MAJOR (IONIAN MODE)
312
min
MINOR (AEOLIAN MODE)
313
dor
DORIAN MODE
314
phr
PHR PHRYGIAN MODE
315
lyd
LYD LYDIAN MODE
316
mix
MIX MIXOLYDIAN MODE
317
loc
LOCRIAN MODE
318
ma.p
MAJOR PENTATONIC
319
mi.p
MINOR PENTATONIC
320
key
c
SCALE KEY C (DEFAULT)
321
c#
SCALE KEY c#
322
d
SCALE KEY D
323
d#
SCALE KEY d#
324
e
SCALE KEY e
325
f
SCALE KEY f
326
f#
SCALE KEY f#
327
g
SCALE KEY g
328
g#
SCALE KEY g#
329
a
SCALE KEY a
330
A#
SCALE KEY a#
331
b
SCALE KEY b
400
seq
met
on
Enable metronome at record+play (default)
401
rec
Enable metronome at record only
410
scn
tic
Change scene immediately (default)
411
bar
Sync scene changes with bar end
message
sent
received
clock
start
stop
continue
position
note
cc
pitch bend
program change
polyphonic key pressure
channel pressure
to prevent any changes to projects, patterns, scenes, paeds and settings you can use lock mode.
hold (manus) on start up to lock the device.
lok will display on the screen for about 1 second.
any changes made on the device will reset when the device is restarted.
error code
meaning
solution
E.01
sram error
your unit needs to be repaired
E.02
flash error
E.03
codec error
E.04
lfs mount error
file-system error, flash needs to be formatted
E.05
sample_fs error
if your segment display shows a file-system error code it means the file-system needs to be formatted. to do this, power the device off, then hold (altero) + (erado) and turn it on.
this will format the drive erasing all sounds and help your device to boot up again by removing any files that were causing issues. make sure to update the OS to our latest release as we are constantly fixing bugs that may cause such issues.
previous chapter
next chapter
