click an image to view components or to download ready-to-print stl file.
the custom accessories you see here are printed on a prusa i3 MK3 3D-printer. check out: prusa3d.com
. if you don’t own a 3D-printer, we recommend you check if there is a maker space somewhere close to you – they might help you! some of the larger models like the wheel can take more than 8 hours to print. but the smaller knobs should take less than 30 minutes. good luck!
pro-tip: make sure you print the models in the right direction to avoid undercuts and make them look as good as possible.
when it comes to color and material, use your imagination! but if you
like the colors we used – you might want to order the same PLA filament from colorfabb in the following RAL colors:
RAL 1003 signalgelb
RAL 3020 verkehrsrot
RAL 6016 türkisgrün
RAL 5017 verkehrsblau
check out: colorfabb.com
some accessories, like the handle need to be assembled from two parts or more. please see the assembly instructions (bundled
with the 3D-files
) how to mate
the parts. you might need to use additional screws. and some parts needs to be forced together using
a little preassure or a rubber mallet. be careful when assembling not to break any parts. there is no need for any glue.
the frekvens collection of speakers and lights are perfect to be used when creating music together.
1. 3D-print some add-ons
2. build your own light and sound rig
3. invite some friends for
a pocket operator party
4. turn up the volume!
pocket operator, buy now!
tap an image to view components
or to download ready-to-print stl file.
'I wanted the collection to be
equal playful and flirtatious.
with no ifs and buts.'
– the designer