return to index
sometimes you will need to press buttons in sequence, sometimes in combination. these illustrations and texts will help you to follow along in the guide.
to press a button, tap it and then release. to hold a button, press it and keep it pressed down. many of the knobs and buttons have different functionality depending on the context.
a single button in a cell is for a SINGLE press.
multiple buttons in a cell divided by a plus is for a combination press.
multiple buttons in a cell divided by an arrow is for a sequence press.
the hold icon above a single button means you’re supposed to long hold.
multiple buttons divided by a plus is for a combination hold.
HOLD THE FIRST BUTTON, THEN RELEASE AND HOLD THE SECOND BUTTON.
the tap icon above a single button means you’re supposed to press the button and release it.
multiple buttons divided by a plus is for a combination tap and hold.
multiple buttons in a cell divided by an arrow is for a sequence hold.
the paeds will show when any paed can be pressed or a value typed using them.
when the paed leds are blinking, it’s displayed with small red dots above the paeds.
when paeds should be pressed to start an action on the device a hand will show to describe this.
when a knob is shown in a cell this describes TURNing the KNOB.
the fader icon will show either one of the three settings: upwards for maximum / downwards For minimum / middle for the mid setting.
when the time code view is shown in a cell the function of that view is described below.
the faedr icon will show either one of the three settings: upwards for maximum / downwards For minimum / middle for the mid setting.
icons that are lit up on the display in some scenarios will show in the bar running across the top.
previous chapter
next chapter
